Translate

Pages

Welcome To My Darkside




Sunday, August 29, 2010

DIY Halloween Paper Towel Roll and Tealight Candles




This project is all about reusing "throw- a -way" items and re purposing them into something useful. Here I used the cardboard paper towel roll. Something one would normally just throw away can easily be re-purposed into a creative, inexpensive, easy, Halloween decoration or prop. I remembered a how-to I came across in which one created Halloween candles using PVC pipe. I loved the idea and had every intention of doing just that until I remembered I didn't have any PVC, although, I did have a paper towel roll! I really hadn't any idea if it would work just thought I would try anyway. It replaced the PVC perfectly and for the candle flame I used a tea light!

For this project you will need:
Paper towel rolls
Toilet paper rolls
Scissors
Glue gun
Glue sticks
Masking tape
Plastic tea lights
Glass pebbles
Craft paints
Paint brush








Because the candles are made from a light weight paper towel roll the top of the candle will have most of it's weight to carry from the glue, therefore, making it top heavy, which can make it tip over easily. I glued glass pebbles that I had left over from another project to the bottom of my candles to weight it down. You can use anything that will fit into the bottom end of your roll, small rock, bolt, etc, anything that is safe and will give it some weight. Here is how I used the glass pebbles. I lay the glass pebble on the sticky side of my masking tape and then tape it to the bottom of my roll. You can also let the glue slip down onto wax paper the peel the paper off leaving the flatted glue, this will help balance the candle as well.

For the top I take the masking tape and "sticky side" down I place the tealight on it then push the tealight and tape down into the top of the roll, I do this three or four times until the top invert is covered. This will give support for the tealight to sit down into the top of the candle.
It should look like this once you are finished with the tape. The tealight should fit easily down into the support and be flush with the top of the roll. Sorry for the blurry pic.




Now that you have the top and bottom done remove the tealight. You are ready to make the dripping wax part of the candle. To do this take your heated glue gun and place it up at the top ridge of the roll then squeeze the the trigger and let the glue slip down the side of the roll. Do this over and over letting the glue act like the dripping wax. Here you can be as creative as you wish, if you like a really drippy candle then add a lot of glue drips, if you just want a few drips as if the candle has not been lit long then only drip a few. It is completely up to you. Once you are done with this part you are ready to paint it.



Inexpensive acrylic craft paint is my choice for this project, however, you can also use spray paint. I find brush on less messy. I give it a healthy coating of paint then set it out to dry.

Once the black is dry, I take white paint and a soft brush if you do not have a soft paint brush handy, and you don't feel like running to the nearest paint store you can use a large make up brush for applying this part. The brush just needs to be soft. Take your white paint and lightly brush it against the candle this will highlight the raised parts of the candle giving a two tone effect and add definition to the drips.

Now you can paint the top of your tealight to match the candle color or leave it white it is up to you the creator.

The decorating possibility using these home made paper candles are endless they can be used anywhere.Here is a picture of a table display I used some of my candles in.

This is a great project for the whole family. It is easy enough for younger children as long a they have supervision. For everyone else it can
easily be expanded on when imagination is applied the possibilities are endless!
Enjoy!

Monday, August 23, 2010

Lighting



Here is Fangs with some different lighting... A blue light and then a red light. I am not sure which I like better? What do you think?

Finally Finished Mr Fangs


Mr Fangs is finally finished. I put the final touches on him yesterday paint and dry brushing, then hung him in the tree to see what he will look like on Halloween! Here are the pictures, I am still trying some different effects, position, lighting, etc to see what is best way is to display him my cemetery. If you have any suggestions please feel free to share. I have much more to make before it is all done and the big night is here. Next project will be up soon.

Thursday, August 19, 2010

Headless... well kind of


A little update on Mr Fangs he is coming a long perfectly! Thought I would share some pic's of him while he hangs around drying. He is such a show off removing his head like that.... Here he is sun bathing on the very hot concrete patio in the backyard.

Friday, August 13, 2010

Tree Crawler


This is what I am working on now, it's a tree hugger. This dead guy will be crawling down the the tree trunk in my yard this Halloween to creep out anyone who dares come close. The skull I finished a few weeks ago, that part is done. His body I am making from rolled up paper and cardboard. As soon as I finish him I will post the pic's.

Deceased Cothing Friday the 13th tee shirt give away!


For those of you that maybe interested, one of my favorite wearable art sites is having a give away. They are also about to bury one of their designs, making it a limited addition. I love the art, I wear it myself and just thought I would share with those that are interested in having one or several for themselves! Enjoy! http://www.deceasedclothing.com/deceased-blog